- Profile :
Machine Constructions :Grinding Head
Cylindrical type bonded to flange for light grinders, segmental head for heavy grinding machines.
Grinding Motor
SIEMENS or NGEF Brand
Down-Feed for Grinding Tool
Multiple spindle system for play and weight equalization.Machine Bed
Welded, modular construction principle. Smooth inner area for good cooling water drainage and easy cleaning.
Guide ways
Hardened and ground steel for main and side guides, easily exchangeable.
Machine Table
Fixed for flat grinding with total coverage, in Electro-Magnetic design or as Cast iron table with ‘T’ Slots & clamps. Electro-Magnetic swiveling table for flat, bevel and multi surface grinding, in one setting up operation, swiveling 360,multiple bearing points with large diameter journals for maximum rigidity. Additional clamping sides with ‘T’ slots & clamping.
Grinding Head Carriage
Heavy casting mounting on four reels with eight New-Departure dust proof ball bearings which act as rollers. Four reels guide the carriage in the carriage ways of the bed. The sliding base, mounted on top of the carriage, is adjustable to knife. The motor base can be swiveled 10 to 25 degrees, so that the knife can be ground either straight or concave as paper knives require only 5 degrees swivel of motor base.Cooling System
Water tank attached with the machine. Cooling fluid application by the electro-coolant pump.
Electrical Unit
All electrical controls are housed in the master panel board